Full cabinets, prebuilt in our workshop (doors supplied loose when shipped) Supplied with hinges, magnetic catches fitted where appropriate, wall hangers and feet etc.

Please refer to the 2nd illustration of an open cabinet to view the choice of cabinet material. All illustrations are shown as oak. Samples available by request.

Solid construction with 18mm backs.

Plinths, fillers and other accessories available separately.

This is just a selection of the cabinet sizes and designs available, please call us to discuss design services or send us a drawing of your proposed kitchen. Any off standard size cabinets available by design.

Door Stile and Rail width is 25mm on the front and 70mm on the back x 22mm thick with 6.5mm reveals both sides leaving a panel thickness of 9mm.
Doors CNC produced from a single slab of high density moisture resistant highest quality MDF. These doors don’t have any joints to move and crack.

Cabinets CNC cut from Oak Veneered MDF;

These cabinets are made from the highest grade 19mm veneered MDF and are spray finished with 2 coats of clear water based lacquer. Seen edges are covered with 2mm solid oak edgebanding with a 2mm roundover. Samples available by request.

Further bespoke materials available by request.
Supplied with two coats of primer ready for final sanding prior to top coat. We recommend a test panel is completed to check compatibility before commencing with your chosen top coat paint finish.

Primed, Slimline Shaker Kitchen Door and Natural Oak Cabinet